Profile LED MOD-50 with space for power supply

Serviceable from the bottom, which allows it to be placed “wall to wall”
Possibility to build an LED lighting fixture with a low unified glare rating (UGR) below 19 (with the JUN-50 prismatic cover)
The fixture can accommodate power supplies and control electronics
Systematic solution for convenient assembly and disassembly
Upward/downward illumination possible
Ability to create lighting fixtures with high luminous efficiency
Luminous efficiency can be increased by 20% by using REFLEX 16-60 reflectors
Resistance to vibrations and oscillations which increases safety
Can be combined into singular and sectioned runs
Can be lacquered (without affecting the color of light)
Can be used with flexible LED strips rigid LED modules
Application

- for the construction of advanced ceiling light fixtures, mounted to the surface or suspended where surface mounting is difficult.

- comfortable and reliable assembly
- the possibility of using self-tapping screws

- the MOD-50 lighting fixture can be anodized or painted. The MOD-50 lighting fixture can generate a strong downward beam (two LED strips 10 mm wide or a single firm LED module up to 24 mm wide) and an upward backlight beam (one 10 mm LED strip)
- the MOD-50 lighting fixture is designed so that its "core" (extrusion with LED strips, power supply, wires) can be fully prepared in advance (in factory conditions). At the destination of mounting, the ready "core" of MOD-50 can be snapped into the previously mounted housing frame and connected to power
- for each 1m of the lighting fixture, two locking bolts must be used. With lighting fixtures shorter than 1 m, at least 2 bolts must be used

The MOD-50 lighting fixture is compatible with the following covers:
- JUN-50 prismatic, material: PMMA, length: 1.5 m, UV resistant , the possibility of obtaining a glare factor UGR ≤ 19
- POL-50 frosted, material: PC, lengths: 1 m, 2m, 3 m, UV resistant