Profile LED MOD-100 with space for power supply

• Service is carried out from below, enabling the construction of wall-to-wall lighting fixtures
• An LED lighting fixture with a low glare rating UGR below 19 (with the JUN-100 prismatic cover) can be built
• The fixture can accomodate power supplies and control electronics
• A system solution for comfortable assembly and disassembly
• Directs light downwards and upwards
• Ability to build lighting fixtures with high light output
• Resistance to vibrations - safety
• Can be combined into strings and segmented lines
• Light output can be increased with REFLEX 16-60 reflectors
• LED strips or LED current modules can be used

- for the construction of advanced ceiling fixtures, mounted to the surface or in difficult installation locations

- comfortable and reliable installation
- the possibility of using self-tapping screws

- the MOD-100 lighting fixture can be anodized or painted
- MOD-100 lighting fixtures can produce a strong downward light beam (6 LED tapes, 10 mm wide) or 2 LED current modules 24 mm wide), and an upward beam (1 LED tape, 10 mm wide)
- MOD-100 is designed as a “core” (profile with LED tapes, power supply, cables), which can be prepared in advance (in factory conditions)
- at the installation site, it is enough to insert the prepared “core” into the body of the fixture and connect power
- use 2 locking bolts for each 1m of the fixture. With fixtures shorter than 1m, use at least 2 bolts.

The following covers should be used with the MOD-100 fixture: 
- JUN-100 prismatic material: PMMA, length: 1.5 m, UV resistant, glare rating UGR ≤ 19 possible
- POL-100 frosted, material: PC, length: 1 m, 2 m, 3 m, UV resistant.