Profile LED IDOL with space for power supply

Important Information

The purchase a piece in the store means the purchase 1 linear meter of the profile or cover

If you want to buy a profile that has a length of 2 meters you have to buy 2 pieces, 3 meters you have to buy 3 pieces, and the multitude of quantity when ordering.

The total length of the aluminum profile or the panel to the profile - is the total quantity of the piece number that was bought in the store.

The choice of the appropriate shipping method will take place at the end of the order process.
The details of the shipping method and packaging of the aluminum profiles you will find here (click in the link)

 Profile for the construction of wall fixtures (sconce fixtures), with an option of simultaneous up and down lighting. It has integrated functions: fitting of LEDs and protecting them with a cover (diffuser), surface mounting, as well as an option of installation of power supply and other electronic components, profiles length 100, 200 cm. 

The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".



If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.


 

Profile LED IDOL with space for the power supply is made of high quality, and on top of double anodized aluminum, making it highly resistant to corrosion and mechanical damage of any kind. It has two chambers on the light source, which can be mounted LED light (imposed restrictions allow you to mount up to three or four LED strips or strips with a width of 12mm and 10mm respectively, each in one chamber). In addition, the profile, you can install the necessary electronic equipment, necessary to power and control light.

Profile IDOL is usually used to build all kinds of wall fixtures (sconce), which provide the ability to simultaneously light both up and down. Due to the wide range of functions can be used to light pedestrian running along the walls and the ceilings, corridors, hotel or office, stairs and many other places. It is an aesthetic and pleasing housing adapters and connections 230V current. Available lengths are 1m and 2m.

It contains the integrated functions: placement of LED lighting and the security guard it (in this case the diffuser).

A profile consists of two elements:

- U is a main part of which is used to mount LED lighting and all the electronic gear

- Z is a part attached to the wall

Both of these elements are combined so on. "Click" and additional protection in this method are plastic rods that you can get included, as well as a completely independent product.

It is recommended that the LED override dedicated to their cover of HSP47, which was made of polycarbonate and has a certificate that guarantees a high resistance to weathering, UV radiation, and it is gnioodporna.

Profile are dedicated to the high-quality polypropylene end caps, as well as elements enabling the correct connection of mechanical and electrical all other components included in the luminaire. End caps make the profile receives adequate protection from damage that may occur as a result of its use, and also protects against the ingress of dust and other undesirable elements into the interior, which could reduce the quality of lighting.

If you are interested in acquiring any of the elements necessary to install the profile, be sure to click on the "Accessories", and there you will find everything you need.

We invite you to familiarize yourself with our offer.