Profile LED IMET with space for power supply

Important Information

The purchase a piece in the store means the purchase 1 linear meter of the profile or cover

If you want to buy a profile that has a length of 2 meters you have to buy 2 pieces, 3 meters you have to buy 3 pieces, and the multitude of quantity when ordering.

The total length of the aluminum profile or the panel to the profile - is the total quantity of the piece number that was bought in the store.

The choice of the appropriate shipping method will take place at the end of the order process.
The details of the shipping method and packaging of the aluminum profiles you will find here (click in the link)

Profile for the construction of wall fixtures (sconce fixtures), with the light beam angle of 30° up or down. It has integrated functions: fitting of LEDs and protecting them with a cover (diffuser), surface mounting, as well as an option of installation of power supply and other electronic components.  

The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".



If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.


 

Profile LED IMET with space for the power supply has been made of high-grade aluminum, which has been subjected to double anodizing, so that the product has a high resistance to corrosion and any mechanical damage. Profile has two compartments in which to place the light source. They may be attached both to the LED light source, but one chamber may be found only three or four bands / LED strip of width, respectively of 12 mm and 10 mm, respectively, as well as the electronic equipment, which is necessary to power and control sources.

Profile is mostly used to produce a variety of lighting fixtures, which are then mounted on the walls, and have the ability to light up or down, depending on your preference. The lamp is lit at an angle of 30 degrees dismissing the stream of light from the plane to which it is attached.

The profile LED IMET consists of two elements:

- U, which is the main part which assembles LED and all necessary accessories electronic

- Z, i.e., the portion which is attached to the substrate

Assembling the structure is very simple. Both elements are joined together by the so-called. "Click" and the additional protection connections are plastic rods that can be found in a set, and as a separate item in our store. This profile is in standard lengths of up 1 m and 2 m, in the case of interest length of 3 m, please contact the service.

The profile has been designed to allow a perfect hiding power supply and other electronic components in its interior, so that it can be used to illuminate the pedestrian pathways that run along the walls and ceilings, as well as all kinds of corridors, stairways and other such facilities.

Power LED profile LED IMET recommended to override a special cover of HSP47, which is dedicated specifically for him. You can choose from iris milk and transparent. Both are made of polycarbonate and both the one and the other has a certificate that guarantees resistance to all weather conditions, which could damage the iris and UV radiation.

Profile are dedicated accessories, including polypropylene caps, as well as elements that are designed to enable connection of all electrical and mechanical components that are part of the luminaire. All optional accessories can be found on our website under "Accessories".

We invite you to familiarize yourself with our offer.