Important Information
The purchase a piece in the store means the purchase 1 linear meter of the profile or cover
If you want to buy a profile that has a length of 2 meters you have to buy 2 pieces, 3 meters you have to buy 3 pieces, and the multitude of quantity when ordering.
The total length of the aluminum profile or the panel to the profile - is the total quantity of the piece number that was bought in the store.
The choice of the appropriate shipping method will take place at the end of the order process.
The details of the shipping method and packaging of the aluminum profiles you will find here (click in the link)Profile for the construction of wall fixtures (sconce fixtures), with light beam directed up or down. It has integrated functions: fitting of LEDs and protecting them with a cover (diffuser), surface mounting, as well as an option of installation of power supply and other electronic components, profiles length 100, 200 cm.
The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".
If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.
Profile LED IKON with space for the power supply has been manufactured with high quality, double anodized aluminum, making it resistant to corrosion and other damage. It has two separate compartments which are dedicated light sources. May either be mounted anywhere LED light source (must be borne in mind that one chamber can place up to three or four tapes or LED strips, of a width in this case are 12 mm and 10 mm, respectively), as well as the necessary electronic equipment, which It will be used to power them and control them.
The most common profile LED IKON's destiny in the production of various kinds of lighting fixtures, which are then mounted on the walls and have the ability to light up, and down.
The whole consists of two main elements:
- Part U - Home, which takes place in the assembly of LED lighting and all the electronic gear
- Part Z - fixed to the ground
Combining these two elements is very simple. It takes place on colloquially saying "click" and the additional protection of this process are special plastic rods that guarantee durability. The rods are complete profile, but are also available as a separate article. Remember that all the necessary products that will serve you for assembly profile without any problem can be found on our website under "Accessories"
Profile design has been carefully thought out, so it allows you to hide the electronic gear inside so that it became invisible to the eye. That gives a lot of possibilities for use of the product, including lighting pedestrian, which can run along walls, ceilings, corridors, offices and corridors, schodu gear and many others.
It is recommended that the LEDs were hiden by special cover of HSP47, which is dedicated to this profile. It may be milky or transparent, depending on preference. Both versions are made of polycarbonate and are certified by the resistance not only to weather conditions, and also to UV radiation.
Profile as an accessory must acquire a special polypropylene plugs, which ensure high product protection and prevent the penetration to him all kinds of pollution and the elements enabling the correct connection of all mechanical and electrical elements comprising the entire luminaire.
We invite you to familiarize yourself with our offer.
