RGBW LED strips 12V 5050 - Construction of the LED strip is based on a three-chip SMD LEDs. On this tape you will find LED besides the traditional RGB LEDs SMD LEDs 5050 in color hot or cold (depending on the model of LED strip). Through the use of alternating RGB LEDs and LED (MONO), we can get besides a full range of colorful hues as white in color with warm or cold. To suitably adjust the RGBW LED strips
also require appropriate controller. RGBW LED strip is mainly used for decorative purposes.
RGBW LED strip can be used in the system FIBARO
to cooperate with the controller RGBW.
Decorative lighting and eco-friendly solution for durability estimated at 35 thousand., Hours of light is nothing else but easy to assemble tape LED SMD 5050 variant warm white color temperature. In addition, the light may have any other color, in accordance with the characteristics that have RGB led strips.
The substrate for light emitting, which is the bar on which are placed the modules is made from a flexible copper laminate in white. It's a very universal solution and the color of the substrate supports LED lighting effect.
The entire 5-meter strip contains 300 LED 60 has a meter. Customers appreciate the advantages of this lighting solution, primarily due to easy installation, flexibility in arranging illumination (the possibility of cutting every 5 cm multicolor) and the small size of the object. In this case, resistance to damage. In terms of the quality of the light source can not be underestimated is the long service life, incomparably longer compared to conventional bulbs. Model tape, which we in this place can shine 35 thousand. hours. High energy efficiency. 14W and 1.2A per meter.
Warm white is a color variant more sun, tending towards yellows. It is friendlier to the eye, creates a so-called. atmosphere, but at the same it gives the impression of weaker than in the white cold and neutral. It is preferable to use it where the overriding role of lighting is to highlight the space, giving it clarity. Most often used in the interiors.
TECHNICAL DATA SUBJECT
Supply voltage - 12V DC
Light color: RGBW MULTICOLOR & WHITE
The luminous flux (5 meters): red 620 nm; green 520 nm; blue 460 nm (+/- 2%); warm white 2700-3300K
Number of LED (meter): 60
LED quantity (roll 5 meters) 300
Power consumption (meter): 14W
Power consumption (roll 5 meters): 72W
Power consumption (meter): 1.2A
Power consumption (roll 5 meters): 6A
LED type: SMD5050 (4xCHIP)
Beam angle: 120 °
Section cuts: 5cm
Backing: a flexible copper laminate PCB
Colour base: white
The dimensions (width x height) - 12 x 3 mm
Lifespan: 35 000 hours
Warm-up time to 60% of: 1 s
The number of cycles on / off: 50000
Świetlenego stream factor of 30 000 h light: 30%
Starting time: 1.1 seconds
Lamp Power Factor: ≥ 0.5
Cooperation with dimming: PWM dimmers only