Profile LED PDS-4-PLUS - C1263

The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".



If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.

• Designed to reach an IP67 waterproof rating
• Minimum dimensions for 14 mm wide LED strips and to obtain a line of light
• Dedicated PDS-4-PLUS end cap - no need to cut the covers to fit the end cap
• LED strips mounted quickly and securely with the 8-KLIK silicone sleeve
• Easy and clean servicing of watertight LED strips in the profile (without tools or glue)
• Multiple additional accessories

- multipurpose
- designed for the construction of indoor lighting fixtures with increased ingress protection

- with mounting accessories from KLUŚ
- with fixing glues, professional double-sided adhesive tapes

- possibility of making a linear fixture with IP67 protection, which means the fixture is dustproof and waterproof
- line of light obtainable with the LIGER cover an LED strip with at least 120 LED/m 9.6W
- space for LED strip: 14 mm

Profile bending with covers: HS, LIGER, KA.Can be bent in the plane adjacent to the LED strip.

- minimum radius – bending radius which when exceeded causes destruction (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile
- internal radius - refers to the profile bent so that the cover is facing the inside of the arch
- external radius - refers to the profile bent so that the cover is facing the outside of the arch
- irregular curves are possible after consultation and individual quotation
- when bending anodized profiles, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius)