Profile LED MICRO - ANO - white - RAL9010

Profile MICRO - ALU is made of high-quality aluminum (for the relevant version is also available double anodized - well protected against corrosion and mechanical damage, as well as the version painted black RAL 9005 and white RAL 9010). Profile to tape or strips, the width of which does not exceed 10,8mm including the LED light sources.

Profile usually is applied to the LED lighting strips of soft, for all kinds of lighting and illumination for indoor use (interior design, furniture, stairs, exhibitions, stage design, advertising), lighting elements exterior architecture.

Fixing profile MICRO - ALU is very simple and it takes place using double-sided tape or moutning bracket, which ensures easy and reliable mounting on the surface are not necessarily perfectly flat.

If you need to install profile plates cardboard - gypsum should be used for this special spring surface PDS, but if the assembly is to be held in the ceiling type Armstrong with springs PDS is recommended that supplementary use special lock washers. Depending on your preferences and needs, there is a possibility to make the luminaire which is characterized by high tightness and resistance to penetration of solids, dust and water (IP 67).

It is recommended that the LED override special for this purpose cover K, KA-BIS, HS (optional version milky or transparent), LIGER (milky opaque) or transparent focusing S, through which it is possible to obtain a beam angle of 10 degrees. All covers are made of polycarbonate, and the added bonus is that the cover HS received a certificate that guarantees excellent resistance to all weather conditions (including rain and sun), UV and flammability.

Profile are dedicated standard or conduction polypropylene caps and the brackets for which are made of galvanized steel or chrome-plated steel. It is recommended to use these caps to avoid the entry of dust and other undesirable elements that could cause contamination LED strip, which later would result in a deterioration of its light parameters. All the necessary elements to complete the construction of the profile can be found on our website under "Accessories".

We invite you to familiarize yourself with our offer.

Advantages: small size (only 6 mm high) allows for complete integration in the walls of the furniture of very small sections for easy assembly, low weight, good heat transfer, environmental friendly profile
- Cover: frosted; transparent (to choose accessories)