The purchase a piece in the store means the purchase 1 linear meter of the profile or cover
If you want to buy a profile that has a length of 2 meters you have to buy 2 pieces, 3 meters you have to buy 3 pieces, and the multitude of quantity when ordering.
The total length of the aluminum profile or the panel to the profile - is the total quantity of the piece number that was bought in the store.
The choice of the appropriate shipping method will take place at the end of the order process.
The details of the shipping method and packaging of the aluminum profiles you will find here (click in the link)
The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".
If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.
Profile KOPRO this angular profile, which is made of high-grade double-anodized aluminum. With anodized profile it is perfectly resistant to the processes of corrosion and mechanical damage. It is designed for a maximum of two strips or LED strips, whose width does not exceed 10,8mm.
Profile is used for the construction of indoor luminaires definitely very universal use. It is designed for installation in a corner of the concave surfaces converging with each other at right angles, as in the case of furniture, cabinets, shop windows, and the ceiling in contact with the wall. It can also act as a framing wall lamps. Profile KOPRO directs a beam of light at an angle of 45 degrees, so you can get the effect of illuminating accent, and you can avoid glare. It is possible to obtain a uniform line of light, thanks to milk shield (KOPRO KOPRO L or K) and accordingly closely spaced LED lamps.
Fitting the profile is carried out with the help of a wedding or screws that are placed in the walls of the profile, which then will be LED. It is important to select screws and bolts appropriate for a given substrate. Drilling holes in the bolts or screws should be made in places designated lines (inside the profile). In the case of ceilings cardboard - plaster profile can be secured using springs assembly GP.
Mounting profile KOPRO may also be held with the participation of assembly adhesives, which are helpful in external profiling. After proper installation of the profile, from the side of the ridge is not tall produce a channel through which you can run power cords.
There is nothing to prevent the profile installed two LED strips with a width of 10mm or one strip, the width of which shall not exceed 20mm.
It is recommended to fix the structure in one of three types of casings and according to the matching plug: the casing KOPRO-P (flat) - KOPRO plug-P; casing KOPRO-L (half-round) - cap KOPRO-L; casing KOPRO-K (Angle) - cap KOPRO-K. All covers are made of polycarbonate.
Profile should be used caps that will protect it against the ingress of dust and undesirable elements. They could cause contamination LED strip and thus exacerbate the parameters of light.
A major advantage of the profile is that because of the possibility to install two strips inside the profile can serve as a basic energy-saving lighting.
We invite you to familiarize yourself with our offer.