Important Information
The purchase a piece in the store means the purchase 1 linear meter of the profile or cover
If you want to buy a profile that has a length of 2 meters you have to buy 2 pieces, 3 meters you have to buy 3 pieces, and the multitude of quantity when ordering.
The total length of the aluminum profile or the panel to the profile - is the total quantity of the piece number that was bought in the store.
The choice of the appropriate shipping method will take place at the end of the order process.
The details of the shipping method and packaging of the aluminum profiles you will find here (click in the link)Set includes - Profile 1m + 2 x cords anti-slip
The product you have selected contains only - aluminum profile + 2 x cords anti-slip - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".
If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.
Profile STEPUS stair profile is made of high-grade aluminum, which has undergone double anodizing, so that the profile is resistant to corrosion and mechanical damage, with the possibility of using LED diodes in the upper and lower half space.
To the top lighting LEDs is used on the side, where the led strips width does not exceed 7 mm, while for the lower lighting of standardized tape or strip LED with a maximum width of 10.8 mm.
STEPUS profile is used for lighting LED strips placed on soft or hard, for lighting and illumination (depending on the power of applied LEDs). The profile can also be placed on the edges of stair steps in cinemas, shops, clubs and restaurants. It allows you to direct light in the opposite direction than the eyes of the user. As a result, it is possible to achieve the effect of delicate highlights, not gross eyes.
To install the profile to the ground to be used for the mounting screws and glue. There is also the possibility of a luminaire of high tightness and resistance class IP 67.
It is recommended that the LEDs mounted in the lower part of the profile override a special cover K, KA-BIS, HS (choice of milk and transparent) and LIGER (version milky dull). All covers are made of polycarbonate. One of the guards (HS) received the certificate, which guarantees excellent resistance to sun, rain and other weather factors, UV and flammability.
In addition, it should be remembered that the diode on the upper part of the profile with a special rope override the anti-slip, which is also mounted in a position for attaching the profile to the substrate.
To connect the profiles in the corner of the convex ratio is 90 degrees cap Corner STEP-90. Cover guarantees a safe and devoid of sharp corners, and also aesthetic finishing profiles that are used to illuminate stairs.
The anti-slip rubber strip is included with the profile of STEP, but it can also be purchased as a separate article. Installation of the anti-slip rubber strip is not the most difficult, and it makes it easier to specially designed instrument.
Profile should include polypropylene plugs to protect it against the ingress of dust and other unwanted objects, which could lead to contamination LED strip, and thus to a deterioration in the quality of light.
We invite you to familiarize yourself with our offer.
application
for LED lighting strips on soft or hard
for lighting and illumination (depending on the power of applied LEDs)
Use STEP profile on the edge of a stair level;
STEP profile helps to direct the light in the opposite direction to the vision of the user. In this way we get a gentle lighting effect - not offending the eye.
Product description:
Material: anodized aluminum
Standard lengths: 1m, (we sell profiles in sections 1 meter)
Mounting: mounting adhesives, double-sided tape (accessories)
Ending: Plastic plug (accessory)
