Important Information
The purchase a piece in the store means the purchase 1 linear meter of the profile or cover
If you want to buy a profile that has a length of 2 meters you have to buy 2 pieces, 3 meters you have to buy 3 pieces, and the multitude of quantity when ordering.
The total length of the aluminum profile or the panel to the profile - is the total quantity of the piece number that was bought in the store.
The choice of the appropriate shipping method will take place at the end of the order process.
The details of the shipping method and packaging of the aluminum profiles you will find here (click in the link)
The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".
If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.
If you are interested in sections longer than 1 meter write a letter will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country it is different from the maximum length of the profile that we can send. It does not depend on us only by courier.
We also service cutting aluminum profiles to the specified dimension - write or call get comprehensive information.
Profile TETRA-43 is a high-grade aluminum slat assembly. The fact that it has undergone a double anodizing is well protected against the process of corrosion and mechanical damage to which it is exposed during use. You will not need to worry about durability.
There are two versions, the first of which is the strip TETRA-43, which makes the set (bar + profile) is increased by 4,3mm and a second higher strip TETRA-78 booster set (bar + profile) of 7.8 mm.
Profile TETRA-43 is a low profile screed dedicated TRIADA. The aluminum strip makes installation profile. When complete, the two profiles (43 and TETRA-TRIADA) therebetween not high create a channel through which the wire can be performed, and its cross section will amount to max. fi 5mm. As a result, the cable will be removed from sight and will not be disturbed during use.
Fastening profile TRIADA TETRA-strip 43 is performed by using a specially adapted clips made of a plastic material recommended to be set in pairs. By design characterized by durability, pair of clips to be used as exactly as 20cm, so you can achieve the desired effect.
It is worth noting that the strip TETRA-43 has its own cap, which is part of the complementary fashion caps TRIADA.
Additionally, as additional accessories dedicated to the assembly strip are traditional, as well as metallized polypropylene plugs, which can easily be found in our shop.
To be able to go to the assembly of the whole structure, select the preferred substrate for this purpose. Ideally, the ground was flat, making it easier to complete the installation. However, if you decide to choose a surface that has numerous irregularities that screws should loced in places where the profile and substrate adjacent to each other (in the protuberances).
Fixing profile TETRA-43 takes place by means appropriate to the ground screws, which are generally in the "Accessories". The groove in the inner part of the profile perfectly sets the place where you should be drilling holes for screws.
For those interested, including strip profile can be attached using a special part of the fastening system, which, together with optional elements can be found on our website.
We invite you to familiarize yourself with our offer.