Important Information
The purchase a piece in the store means the purchase 1 linear meter of the profile or cover
If you want to buy a profile that has a length of 2 meters you have to buy 2 pieces, 3 meters you have to buy 3 pieces, and the multitude of quantity when ordering.
The total length of the aluminum profile or the panel to the profile - is the total quantity of the piece number that was bought in the store.
The choice of the appropriate shipping method will take place at the end of the order process.
The details of the shipping method and packaging of the aluminum profiles you will find here (click in the link)
The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".
If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.
Profile LED TRIADA is a three-channel profile, which is made of high-quality aluminum. Because aluminum has previously been subjected to double anodizing, the profile has been fully protected against corrosion and mechanical damage. Profile is designed to tapes or strips of a width not exceeding 12,8mm with LED light sources.
Profile LED TRIADA is used in LED lighting LED strips placed on soft or hard, construction, landscape architecture. It may also be mounted in the plane of the substrate sidewalks, in the recesses of suspended ceilings, in passageways, the bike paths, driveways or parking lots. The most common profile is placed in cabinets or sites and serves on a decorative element. Construction of the profile is designed so that when used in areas intended for transport can withstand a standard load, or when maintenance operations are carried out - performance will not be damaged.
It is recommended that the LED profile LED override special for this type of cover K12 or HS12 (available in either milk or transparent). Both guards are made of polycarbonate. It is worth noting that the cover type HS12 is certified, which guarantees its perfect resistance to most of the weather, UV and flammability.
Installation of the profile is very easy and simple to carry out. For its implementation, use double-sided tape, glue or mounting screws, which are the guarantee of the stability of the structure. Mounting plates in cardboard - gypsum is done using springs surface TR. If you have to install the profile on the ceiling type Armstrong and used for this purpose springs TR recommended to additionally apply a special lock washers. It is worth noting that according to the need, there is a possibility to make a luminaire of high-tightness, which will be characterized by a resistance class of IP 67.
Profile LED TRIADA are dedicated polypropyleneend caps, which are designed to protect the profile against the ingress of dust and other undesirable elements that could cause contamination LED strip, which later would result in a deterioration of its light parameters. Caps and other necessary elements to carry out the installation profile are available on our website under "Accessories".
We invite you to familiarize yourself with our offer.
- to be installed in the plane of the substrate sidewalks, traffic routes, bicycle paths, driveways, parking lots
- construction of the profile when used in areas intended for vehicle loads and provides standard maintenance and operations