Price for 1 meter length profile - no cover and end caps.
The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".
If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.
Mounting profile TES-16 is made of aluminum and has not been subjected to the process of anodizing. The variant TESE different height profile on its side wings, which is on the inside based on the plasterboard to which it is mounted. In the case of profile TESE this dimension is 12.5 mm and the profile TES-16, as the name suggests 15.9 mm. Dimensionally is therefore prepared to drywall with a thickness of 5/8 ".
Profile of the following series of products WIDTH their primary task is to build luminaires with high luminous efficiency In practice, this means that it was designed in such a way as to accommodate up to 4 strips of LEDs. Design and preparation of aluminum with covers, make that when you turn on the light sources the human eye sees a straight flat line strong light. Thanks to this solution just as well as the viewing of modern decoration, which as main lighting.
The important news is that the profile should be installed along with the construction of walls and ceilings built with drywall. More specifically done by screwing the flange profile of the resulting scaffold. The role of technical profile lies in the fact that in its interior is assembled a different profile - SEKOMA. It allows practical design profile. Installation is very simple and involves in clicks grooves profile special springs BLOCK. In the future, if necessary, replace the architectural profile, mounting profile can be on the spot. We save time and money dismantling, because enough to buy profile SEKOMA.
What gives you the use of LEDs?
LEDs are the most energy-efficient source of lighting offered on the market, they have called. efficiency. at 80-95%. Durability LED lighting module is an average of 50 thousand. hours. The LED is resistant to shock and impact, which crashed an ordinary light bulb. LED technology can achieve virtually any light color (RGBW). LEDs achieve full brightness within microseconds, work with dimmers. They have a low emission of heat, check the objects sensitive to heat radiation, which must be kept stable temperature. They are organic.
Accessories dedicated profile
- TESE cap of polypropylene. Do not let the light and protect the LED strip against the ingress of any kind of dirt which could reduce the performance and durability of light sources.
- BLOCK steel springs.
Comments
Profile is not intended to places where water has access or high humidity.
Prior to installation, to lead the supply lines to the profile.
After mounting profile, we determine the direction of dismantling.
Mounting profile after assembly must maintain a straight line and the cross-sectional shape.
Power supply units are placed in bulk or thickness of the plasterboard.
"SZER" profiles are designed to build LED fixtures of significant light output. The profile comes with BLOK springs, which allow you to connect TESPO KPL and SEPOD profiles. The width of such profiles allows a maximum of 4 LED strips of 10,8mm each. The profile comes with a dedicated frosted SZER cover which has very good light diffusing properties and light transmittance of 98%. Due to the cover and properly designed height of the profile you can obtain a line of light. A characteristic feature of SZER profiles are their big, aesthetically designed radiators which have effective heat dissipation properties. TESE KPL. – mounting track designed for making accurate slots (grooves) in the surfaces of walls and drywall ceilings and embedding fixtures based on the SEKOMA profile. This track is mounted to the structure of walls and drywall ceilings.
TESE KPL. mounting track is fixed with the SEKOMA profile by being snapped together, using a suitable lock and BLOK spring (included).
NOTE!
- After snapping the fixture into the mounting track, the fitter should mark the direction of unclicking, without disturbing the aesthetics of the fixture.
- TESE KPL. mounting track fixed to a wall, ceiling, etc. must maintain a straight line and cross-sectional shape. Excessive bending of the track, crushing, or unbending its walls will prevent proper mounting of the fixture. - The profiles are dedicated for use in places not exposed to water.