Profiel LED TEKNIK-ZM-TK

The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".



If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.

• A mounting channel flush with the surface of solid masonry walls and ceiling
• Place for routing power cables
• The TECH-28 protective insert can be used to protect the interior of the TEKNIK-ZM-TK channel against dirt during construction work
• Possibility to connect the TEKNIK-ZM-TK in long runs using ZM connectors

- for building precise mounting channels for linear LED lighting fixtures flush with the surface of a wall or ceiling, made in masonry or casting technologies

- to be embedded in the surfaces of solid walls and ceilings, before plastering
- after applying the plaster, the edges of the TEKNIK-ZM-TK profile must be flush with the plane of the finished wall 
- LED lighting fixtures are installed in the TEKNIK-ZM-TK profile with TEKNIK clips

- TEKNIK-ZM-TK allows you to connect mounting channels into runs between the planes of walls made of different materials. For example, the mounting channel embedded in a solid masonry wall can be connected with a profile embedded in drywall (e.g. TEKNIK-ZM profile). The final effect is a line of light passing from the masonry load bearing wall to the partition wall made of drywall
- TEKNIK-ZM-TK is compatible with many profiles, e.g. LOKOM, GIZA, LIPOD, GIZA-LL
- if a profile with a height of less than 24mm is installed in TEKNIK-ZM-TK (e.g. GIZA-LL), paint the inner side walls of the TEKNIK-ZM-TK mounting channel the color of the ceiling or wall surface finish
- the TEKNIK-ZM-TK assembly channel has space at the bottom for cables and micro-connectors
- dimensions of the mounting groove in the masonry wall for the TEKNIK-ZM-TK profile: 40mm (width) x 35mm (depth)