Profiel LED MOD-KOZE-100

The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".



If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.

• The lighting fixture can be removed and remounted without damaging the ceiling
• An LED lighting fixture with a low glare rating UGR below 19 can be built when utilizing the JUN-100 prismatic cover
• The profile can be mounted "from below" allowing to build ceiling lighting fixtures that run "wall to wall"
• Either LED tapes or LED current modules can be used
• Linear and polygonal connections are possible with ZM connectors
• Secure mounting, resistant to vibration

- for the construction of professional lighting fixtures with a cover mounted flush with the ceiling or wall surface
- for LED lighting fixtures recessed in the ceiling, installed and serviced as a system
- for creating precise mounting channels in drywall for LED lighting fixtures
- for building LED lighting fixtures that can have a glare rating UGR ≤ 19

- recessing the “mounting channel” (RAM-KOZE-100) in the surface of a drywall ceiling 
- mounting the "core" of the lighting fixture (OMODO-100) in the “mounting channel” (RAM-KOZE-100)

- MOD-KOZE-100 fixtures are designed for 7 LED strips (10 mm wide), 8 strips (8 mm wide) or a LED current module up to 24 mm wide 
- the lighting fixture is designed so that the "core" of the lighting fixture (profile with LED tapes, power supply, wires and end caps) can be prepared in advance, in factory conditions  
- the only thing to be done at the installation site is to insert the prepared “core” (OMODO-100) into the pre-installed mounting channel (RAM-KOZE-100)  
- two locking bolts must be used for every 1m of lighting fixture. For lighting fixtures shorter than 1m, at least 2 bolts
- the gaps between the edges of the mounting channel and the "core" of the fixture can be finished with a dedicated silicone cord
 

The following covers are compatible with MOD-KOZE-50:
  - JUN-100 prismatic material: PMMA, length: 1.5 m, UV resistant, glare rating UGR ≤ 19 possible
  - POL-100 frosted material: PC, lengths: 1 m, 2 m, 3 m, UV resistant