Important Information
The purchase a piece in the store means the purchase 1 linear meter of the profile or cover
If you want to buy a profile that has a length of 2 meters you have to buy 2 pieces, 3 meters you have to buy 3 pieces, and the multitude of quantity when ordering.
The total length of the aluminum profile or the panel to the profile - is the total quantity of the piece number that was bought in the store.
The choice of the appropriate shipping method will take place at the end of the order process.
The details of the shipping method and packaging of the aluminum profiles you will find here (click in the link)
The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".
If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.
The profile LOC - 30 includes a set of two profiles to be fitted in the concave corner in the plane coincide with each other at right angles. The product can be used for mounting on rims of the lower cupboards and the wall to which the cabinet is attached, and in many other places.
For mounting profile can be found specially designated lines that indicate where in the drill holes. Includes a profile of a slat assembly and the accompanying screws to be placed in pre-drilled holes.
Mounting the entire structure is simple. Simply select one of the sides of the mounting profile and screw it to the plane. It should be remembered that when we choose the broader side, the screws must be matched to the holes so that the tips of the screws do not interfere with the lighting profile. It is recommended that the hole had a diameter of 3 mm, a countersunk head cross section of not greater than 5 mm.
The second creates a profile luminaire LED. Assembly which consists of the fixing of the assembly strip via snaps TECHNIK. Between the screed and housing profile will create a space that can be used to carry out its cables.
With the luminaire built profiles LOC-30 you can get a very good illumination of the selected space. Mounting the longer side in relation to the lower rims wall cabinets will make the beam of light is directed downwards at an angle of 30 degrees, thus illuminating the surface of the countertop. The light can be turned on by specifically installed for the purpose of the motion sensor. Binding profile is recommended to install two LED strips with a width of 10mm or one strip with a width greater than 10mm, but it should not exceed 21mm.
To build a structure involving profiles LOC-30 will be necessary:
- Mounting profile - LIPAC-30
- Binding profile - OPAC-30
- Latches Teknik (minimum 4 pieces)
- Caps (right and left)
- Casings HS 22 (milky and transparent) and others of the same section
- Screws (should be appropriately selected heads so as not to interfere with the assembly fixture with mounting strip).
The product you have selected contains only aluminum profile. All the necessary accessories like veil, Fasteners, end caps, mikrowłączniki or pendants you will find a tab called "Accessories".
If you are interested in sections longer than 1 meter please contact us and we will quote the cost of your delivery. Its height depends on the transport companies, which charge an additional fee for long shipments. The maximum length depends on the country to which it will be sent.
On request it is possible to cut the profiles specified by your dimension. If you have any questions, please contact us, we will try to exhaustively answer the questions for you.
We invite you to familiarize yourself with our offer.