The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".
If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.
Profile for architectural LED mounted on the surface of the collection named by the manufacturer "line of light". The name stems from the design profile. Internal height troughs of 19 mm and the outer - 24.5 mm, allow the LEDs with a pitch of 15 mm and milk casing, to create a uniform line of light.
Highlights of profile
- The profile is anodized, which is also protected by the oxide coating formed on the aluminum during the chemical process,
- It is light,
- Compact profile allow precise assembly virtually anywhere,
- Design makes it easily releases the heat,
- It is not often thrown out by their strength and therefore is environmentally friendly product,
- Simple installation in many ways, depending on the destination *
- A wealth of accessories to create a beautiful luminaire
- The profile of the bottom can be placed one or two strips of LEDs. These capabilities allow you to adjust the light intensity using eg. WiFi drivers that can enable or disable one of the LED strips. Much depends on the applied lighting solutions and modernity, eg. Remote communication between the various elements of the lighting system.
_____
* Accessories for mounting to the surface of the spring, a spring groove and clips TEKNIK. The first mentioned type of spring can attach profile does not recessed into the so-called. slot. Springs grooving allow mounting luminaires with flange, provided the inlets and outlets. Clips fit into the small tabs in the profiles of the same brand.
As a result of anodizing?
The result of the process is cured coating, suitable Metal satin matt shade - decorative value. Aluminum anodizing through gaining additional protection against corrosion and protection against mechanical damage. Anodizing is the first step, alongside additional protection against moisture, the application profile outside the building.
Adjusting to other profiles
The profile can be mounted in the profile architectural specialist called TEKNIK, also available in our shop. This is done on the basis of the click into place. In addition, the profile-mounted LIPOD has a height of 5 mm less than the depth of the slot / groove formed by the basic technical profile. Using a square shell is obtained the same effect subtle fusion light line below the plane of the wall or ceiling. This limits the width of the light beam for the light in one direction, but the effect of a continuous line of light is even more emphasized.
Due to this simple solution saves time and we are comfortable, durable and professionally installed product. The latch is available in accessories dedicated profile LIPOD to view and purchase the tab above the text.
Comments
During installation you are required prior supply power cables to the profile.
Power supply units are placed in bulk or thickness of the plasterboard.
Surface mounting is possible on the plates with a minimum thickness of 10mm.
