Profiel LED 3035-KOZE

The product you have selected contains only - aluminum profile - does not include the accessories located in the Accessories tab.
Additional accessories like covers, end caps, electricity conductive end cap, mounting bracket, fasteners, mounting springs, proximity switch, micro switch, mounting system and others are available under "Accessories".



If you are interested in longer lengths than one meter, write to us we will quote the delivery cost to you. Transport companies expect additional charges for long shipments.
For each country is different maximum length of the profile that we can send. It does not depend on us only by courier.
We also do service cutting aluminum profiles to the indicated size - write or call get comprehensive information.

3035-KOZE =

Profile components:RAM-3035-KOZE 

• The openwork structure of the mounting channel and its adjustable elements (bridges) allow placing power supplies and other electronic devices on any section of the LED lighting fixture, eliminating the need for unsightly inspection openings in the ceilings
• The lighting fixture can be removed and remounted without damaging the mounting surface
• The fixture can be mounted "from below" allowing to build ceiling lighting fixtures that run "wall to wall"
• Linear and polygonal connections are possible with ZM connectors
• Secure mounting resistant to vibration
• The profile fits into the thickness of two pieces of drywall

- for the construction of professional lighting fixtures with a cover mounted flush with the ceiling or wall surface
- for LED lighting fixtures recessed in the ceiling, installed and serviced as a system
- for creating precise mounting channels in drywall for LED lighting fixtures (RAM-3035-KOZE)

- embedding the “mounting channel” (RAM-3035-KOZE) in the surface of a drywall ceiling
- mounting the "core" of the lighting fixture (3035-O) in the “mounting channel” (RAM-3035-KOZE)

- 3035-KOZE fixtures are designed for 2 LED tapes (10 mm wide) or 2 LED tapes (8 mm wide)
- the profile fits in the thickness of two drywall panels
- the lighting fixture is designed so that the "core" of the lighting fixture (profile with LED tapes, power supply, wires and end caps) can be prepared in advance, in factory conditions. 
  The only thing to be done at the installation site is to insert the prepared “core” (3035-O) into the pre-installed mounting channel (RAM-3035-KOZE) 
- two locking bolts must be used for every 1m of lighting fixture. For lighting fixtures shorter than 1m, at least 2 bolts must be used
- the width of the gap in the drywall for (RAM-3035-KOZE): from 66 mm to 71 mm
- covers must be cut 2 mm shorter than the aluminum profiles on both ends (creating 2mm gaps on both ends of the lighting fixture)