Power supply voltage HLG-240

Power packs of HLG series are intended outdoor LED applications. about the step IP 65 ~IP 67 protections have the metal casing. They are equipped with the active PFC filter, they are meeting the sternest EMC norms. the HLG- Model of 240 H is distinguishing the increased scope of input voltages from the HLG- 240 version 90 ~ 305 VAC - marking with letter H in the name. Merlon - IP 67, potentiometers are missing to the regulation of the tension and the output current.

And - IP 65, 2 available potentiometers built in from the outside to the regulation of the tension and the output current in the scope c 50 ~ 100 % In B - IP 67, potentiometers are missing to the regulation of the tension and the electricity, additional pair of wires for connecting the resistor from 51 Ω to 1.8k Ω (different values for tension various versions - details in the specification) of current corresponding to the restriction in the scope from 50 ~ 100 % In (leaving the pair of wires obtuse is tantamount to placing max.. of power-driven productivity of the power pack in the scope a little bit above 100 % In. Clenching these ducts is tantamount to limiting the power-driven productivity to a little bit below 50 % In. ATTENTION! The HLG- power pack of 240 H doesn't have the possibility of connecting the outside dimmer (tension signal 1 ~ 10 VDC or PWM), unlike remaining models from HLG series.

C - IP 65, 2 available potentiometers built in from the outside to the regulation of the tension and the output current in the scope c 50 ~ 100 % In, any wires are missing on the entry and the exit of the power pack, screw clamps are in their place