End cap to KOPRO-P

UNIVERSAL APPLICATION 
45 DEGREE ANGLE
THREE TYPES OF COVERS AND END CAPS
 
KOPRO profile is designed to build universal interior lighting fixtures. This profile directs the light beam at an angle of 45° so you can achieve the effect of a mild accent illumination and avoid glare. It is to be mounted in the concave corner of two planes meeting at a right angle (e.g. bodies of furniture, cabinets, where ceiling meets wall, shop windows).

The profile can also serve as a wall lamp fixture. KOPRO profile can be fastened by means of bolts or screws (suitable for a particular substrate) screwed into the walls of the profile which are not intended for mounting of diodes. Holes for the bolts or screws should be drilled in places designated by the lines inside the profile. In drywall ceilings, the profile can be fixed using GP mounting springs.

KOPRO profile can also be mounted using mounting adhesives, which is supported by the external profiling of its structure.After the profile has been mounted, a shallow ‘tray’ is formed on the side of its ridge. It is used to route the power cables.The profile can be additionally equipped with two 10mm wide LED strips or one LED strip with a width of no more than 20 mm. Three types of covers and end caps are dedicated for KOPRO profile:- KOPRO-P  (flat) cover,  KOPRO-P end cap- KOPRO-L   (semicircular) cover, KOPRO-L end cap- KOPRO-K   (angular) cover,  KOPRO-K end cap